Airslide and Airlift connections are among the most widely used and therefore the best-selling connections found on the market. How familiar are you with these connections and their features?
Introduction of Airslide and Airlift Connections and Their Application
Airslide and Airlift are among the most practical connectors that are common in factories producing powder-shaped materials. Among the most important of these factories can be cement factory, flour factory and … He pointed out. In fact, airslides and airlifts are efficient connections for high speed and efficient material transfer. These joints transfer powder-shaped materials such as flour and cement, which move floating through certain fabrics as a fluid through air pressure. So what are the uses of these connections?
Yes, that’s right! Transfer of powdery materials such as cement, flour and …
It is interesting to know that airslide and airlift joints carry the action of transferring powder-shaped materials by air.
Airslides and airlifts that are integral parts of cement factories, flour and … Essentially, they are very useful equipment. Without this equipment, the work of many industries working in the field of powders production would be lame!
Available in different lengths, these joints are designed in a rectangular cube with a thickness of 4 to 10 mm. It doesn’t matter if you use the small size of the equipment or the large size of it.Because either way, there’s a check valve on these joints and an air pipe on the underside of them. The inside of this equipment is also covered by an anti-abrasion cloth called airslide fabric. A significant number of M8 and M12 bolts also surround these joints. The purpose of these bolts is to establish and prevent leakage, penetration or disintegration of the mentioned joints.
As mentioned earlier, airslides and airlifts are made up of two main parts. One part is located at the top and its task is to enter and carry the cargo, and the other part is located at the bottom and is special for air entry.
It is worth mentioning that the above connections are very low noise and since they lack moving parts, they do not require much maintenance and maintenance. The operating temperature of these joints is also mainly estimated to be 150 and in special cases up to 250 °C.
